Everything a readymix plaster should be. And more.
Despite its name Envoplast Plus actually subtracts one expensive and hard-to-procure ingredient from the mix: sand. This unique ready-mid cement plaster only needs water and it’s ready to be applied on a variety of surfaces, from brick and block to stone walls and concrete. Quick to apply with superior bonding strength and cost savings, Envoplast+ is the ideal plaster material for quality conscious architects, contractors and home owners.
Unlike other ready-use plasters, EnvoPlastneeds no sand—river or artificial, which makes it highly crack-resistant and suitable for use on almost any construction surface, internal and external.
EnvoPlast contains high quality additives that deliver superior compactness and ensure high quality consistently across your entire project.
Manufactured to meet R. D. Ventures’ ISO 9001:2005 & ISO 14001 : 2015 Certification, EnvoPlast+ is a certified green material, with more than 75% of its constituents coming from recycled ingredients, including fly ash and processed waste.
Method of Use
Surface Preparation
Mixing
- If it is to be used on AAC blocks, concrete blocks or concrete surfaces, ensure to apply cement slurry before plastering.
- Mix ~20% of water to each 50 kg bag of Envoplast+ readymix plaster. At the site, add water as needed until the desired consistency is obtained.
- Mix thoroughly for five to ten minutes using either a trowel or mechanical mixer. Let the mix stand for about five minutes. Mix once more just before using.
Application
- Spread the mixture evenly for a smooth finish
- You only need to maintain a thickness of 6 to 12 mm to avoid any cracks being formed. Do not exceed this thickness.
- For optimum results, cure two to three times for five to seven days.
Use Cases
Stone walls
Mortar
Brick
Concrete Blocks
Use Cases
Stone walls
Mortar
Brick
Concrete Blocks
What Makes Envoplast Superior?
- Time Savings
- High Quality Additives
- No Sand Needed
- Binds Strongly to Brick, Block, Stone, and Concrete
- Easy Application
- Suitable for Internal and External walls
Technical Description
Appearance | Grayish granular powder |
Main Binder | Portland Cement |
Aggregate | Graded Sand |
Additives | Water soluble additives for better efficiency, binding, water retaining and strength |
Maximum Aggregate Size | Less than 4.75 mm |
Bulk Density | 1.2 – 1.6 Kg/liter unit |
Compressive Strength (mpa) | More than 5 in 28 days |
Coverage | 0.16-0.23 Kg/sq.f./mm (for 10 mm thickness/ 25 sq. ft.) |
Thickness of Layer | 6-12 mm |
Pot Life | 1-2 hours |
Water Proportion (%) | 15% to 20% of the weight |
I’m Interested. Tell me More
Head Office Pune
Samarth Tarrace, Flat no.1, Vimannagar Ganpati Chowk, Near Air Force Station, Vimannagar, Pune 411014
Office Mumbai
M/s Concrete Additives and Chemicals Pvt. Ltd., W11-TTC Industrial Area, Pawane MIDC, Navi Mumbai – 400705.
sales@envoplast.in
Phone
+91 9960383838 | +91 9823025484 | +91 35918083