Just add water!
Say goodbye to messy, time consuming sand-cement plastering! Made from high quality additives, EnvoPlast is a unique ready mix cement plaster that can be used with equal effectiveness on brick, block, stone or concrete surfaces. With its even surface, smooth finish, and superior binding, EnvoPlast provides the ideal surface for tiling. Its unique mix of special binders and additives, make it resistant to water and also reduce the chances of cracks developing in the plaster, in comparison to conventional plasters.
Unlike conventional plasters, EnvoPlast contains no river sand and, thus, no silt or other organic matter, giving it unbeatable crack-resisting properties. In addition, the uniformity in size and structure of the sand grains used ensures compactness and consistency in quality throughout the project.
EnvoPlast is manufactured under stringent ISO certified quality control systems that assure a predictably superior performance on a variety of surfaced, internal and external.
Like all other products manufactured by R. D. Ventures, EnvoPlast stands by the brand’s values of recycle, reuse and regenerate. It is a certified green material, containing > 75% recycled ingredients, such as fly ash, processed waste and non-organic sand.
Application
Mixing
Prepare the plaster by mixing 7-10 liters of water per every 50 Kg bag of EnvoPlast. Use of mechanical mixer-electrical stirrer is recommended for better results. Mixing should be done for 5-10 minutes depending upon the speed of mixing equipment. When the mixture is prepared, leave it for 5 minutes and mix it once again just before use. Do not add any water to the mixture at this point of time. Hard and set plaster should not be mixed again. The correct ratio of water and EnvoPlast is essential for best results.
Surface Preparation
The surface should be free of dust, grease etc., else it will affect binding. If the surface is dry, it should be moistened with clean water.
Applying to the surface
The mixture should be applied within 1-2 hour of preparation. If the concrete surface is smooth and dense, it’s recommended that the surface is made rough with a comb for better sticking of the plaster layer. EnvoPlast should be applied with hand and care should be taken that it doesn’t have direct exposure to sunlight, wind and rain during it’s application.
Curing/Saturation
In normal weather, EnvoPlast doesn’t need curing for first 24 hours. After the plaster is completely dry, curing should be done 2-3 times for 2-3 days. In abnormal weather conditions, curing for 5-7 days is required.
Use Cases
Stone walls
Mortar
Brick
Concrete Blocks
Use Cases
Stone walls
Mortar
Brick
Concrete Blocks
Why construction engineers prefer Envoplast?
- Easy to Apply
- Saves Time
- Even Finish
- No Silt—No Cracks
- Least Rebound
- Assured Quality and Durability
- Money Savings
- Superior Adhesiveness
- Green Building Material
Technical Description
Appearance | Grayish granular powder |
Main Binder | Portland Cement |
Aggregate | Graded Sand |
Additives | Water soluble additives for better efficiency, binding, water retaining and strength |
Maximum Aggregate Size | Less than 2.36 mm |
Bulk Density | 1.2 – 1.6 Kg/liter unit |
Compressive Strength (mpa) | More than 5 in 28 days |
Coverage | 0.16-0.23 Kg/sq.f./mm** |
Thickness of Layer | 6-12 mm |
Pot Life | 1-2 hours |
Water Proportion (%) | 15% to 20% of the weight |
I’m Interested. Tell me More
Head Office Pune
Samarth Tarrace, Flat no.1, Vimannagar Ganpati Chowk, Near Air Force Station, Vimannagar, Pune 411014
Office Mumbai
M/s Concrete Additives and Chemicals Pvt. Ltd., W11-TTC Industrial Area, Pawane MIDC, Navi Mumbai – 400705.
sales@envoplast.in
Phone
+91 9960383838 | +91 9823025484 | +91 35918083